PBP Forum

GENERAL MESSAGES => Call it what you want => Topic started by: Patrick Slayzee on April 01, 2011, 02:51:02 pm

Title: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 02:51:02 pm
KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON. KING BEER BARON.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 02:55:10 pm
You will need;
Packet(s) of biros. Blue, Black, red, Green, whatever... just grab all the packets you can for like $2 or whatever...
Biro ink should bleed through layers of paint, or atleast one.
Empty Glass jar.
Gloves.
Scissors, Pruners whatever....
A teaspoon.
A Maccas Straw (what I use...)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 02:58:59 pm
Acetone, Xylene or 2k or Acrylic Paint Thinners....
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 03:13:21 pm
Pull the inside "cartridges" (the tubes full of ink) out of the pens, and cut them up into smaller peices into your jar. (I find pruners work better than scissors...)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 03:21:46 pm
.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 03:25:40 pm
Now add a splash of your Thinners, xylene, acetone, even rubbing alcohol or whatever, into the jar.
Not heaps. I use the maccas straw, by dipping the straw into the xylene, and blocking the top, so I can "lift" the xylene out and drop it into the jar.
Maybe half way up the ink tubes.... remember, the more thinners you add, the more watery your ink will be, trial and error to get your preffered ratios...
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 03:28:50 pm
Put the lid on, not super tight, but not so it leaks, and leave to sit overnight, a day or two.... whatever.
And just give it a shake now and then whenever you think about it, just to help the thinners suck out the ink from the tubes.
(I would also carefully every now and then open the jar, just to let the gasses out.)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 01, 2011, 03:32:16 pm
Get Creative with your inks... Ive also chucked the felt insides of artline markers into the jar to soke, and added dreggs from spray cans, any other pen or texta I found lying around....

Over the next few weeks I will be adding to this page, showing some of my little tricks to help stain and bleed through layers of buff.
Feel free to add your own recipes too.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 01, 2011, 05:09:53 pm
are there anything you can use instead of xylene apparently metho works?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 09:12:37 am
I mentioned a few at the start, Like paint thinners, acetone (or nail pollish remover)

Metho will evaporate, but may work, never tried... give it a go.
Maybe there'll be some toluene floating around, or even vodka in theory?
Rubbing alcohol.
I guess camping fuel might work, and probably be pretty cool!?
just make sure its the clear stuff, simmilar to kero.

Give it a go man, and let me know how you go.
Just remember, be careful, wear gloves, and try not to breathe in the gnarly fumes.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 09:32:29 am
Ok, so carrying on with the "basic" ink formula...

If you can get your hands on some carbon/stencil/transfer paper, this is pretty cool.
(You might be able to get it from your art class, or ask the teacher to get some, tattoo shops use it to make there stencils, maybe you could ask them for a few sheets? Its expensive, bout $1.50 a sheet.)
The purple dye is actually "Gentian Violet" which is used as a veterinary antiseptic, and also a chemical stainer.

This will bleed through layers of paint.

Again, start with an empty jar
Some scissors
Your transfer paper (purple, and the thick paper one, not the thinner plastic one.)
And your alcohol, thinners, acetone etc....
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 09:43:51 am
Cut the stencil paper up into small peices. ( I used 2 sheets.)
Put a bit of your thinners whatever into the jar, and drop in the bits of paper.
Put on the lid and shake it a bit, leaving it to sit a day, overnight whatever, and shake it now and then.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 10:00:19 am
Just to add to the top two Ink recipes;

Both of these I made with the intentions of them being "Ingrediants" not standalone inks, as you will see in future
additions to this thread. (although, there's nothing stopping you rockin a marker made of these anyway...)

If you leave the lid off your ink jar, the thinners/alcohol whatever, will evaporate. If you've put a bit too much in the jar, just leave the lid off a while so as to reduce. This may take a few days if you've put waaay too much in. Remember: "Less is more".

Also, if you happen to smoke cigarettes, adding a bit of the ash into your ink will thicken it.
(Dont smoke around your open jar of ink, you'll explode!!!)

Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 04:00:14 pm
Ok, now we have those two basics covered,  I'll start showing you the base mixes for my "S****r Specials"...

For this 1st One, You will need;

1 Empty Glass Jar.
A Bottle of Molotow Speedflow AND Coversall.
Acetone, Xylene, 1k or 2k Thinners, or a selection of these.
Can of WD40 or RP7. I use RP7 because its heaps cheaper. (You can also use Fish Oil Capsules/Omega3 capsules or Brake fluid.)
Wood Stain, Deck Stain.
Methylene Blue Crystals. (You might be able to find these in your science class. They are also used in Aquariums to treat water.)
If you struggle to aquire these, just skip this step.
Gentian Violet Crystals. (You might be able to find these in your science class. Also used as a veterinary antiseptic.)
If you struggle to aquire these, use the purple ink from the transfer paper you've already made, or skip this step.
A tea spoon.
A McDonalds straw (or simmilar.)
A nice Pump valve Marker. I preffer the 15mm Molotow Burner markers, but whatever you like best is fine.
(I will also in future posts show how to best convert a $6 "chalk marker" from Officeworks into a Bombing Weapon.)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 04:05:56 pm
Start by mixing the Speedflow and the coversall inks into the jar, about 50/50, and put the lid on and shake it up.
these are great inks as they contain bitumen in them, the same as the black tar stuff that holds the road base together.

Carefully pour this into your empty marker. About 3/4 full.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 04:10:26 pm
.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 04:23:54 pm
Now, take your 1/4 full marker of 50/50 speedflow and coversall
and add about a teaspoon or less of the deck stain/varnish.

Add a heaped teaspoon of Gentian Violet (or a teaspoon or two of the purple stencil paper mix.)
Add a heaped teaspoon of Methylene Blue. (This isnt too important, as I find Gentian Violet works way better.)

Take your straw and "lift" a few drops of the Acetone and/or Xylene into your marker. Roughly 6 drops is heaps.
(You can also use 1k/2k Thinners or just Nail pollish Remover. This is just to give your ink some "Bite" and help it stain.)

Spray some of the RP7 (or WD40) into the lid, a few short quick sprays should do, you dont want too much,
maybe about half a teaspoon or so, and tip it into your marker.
(you can also break open 2 fish oil caps instead, or use some brake fluid, Ive never used brake fluid myself.)
This is just to slow the drying time of your ink, giving it a chance to really soke in, and better chance of staining. It also causes the
buff paint to "bead" off the ink. Ha.


Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 04, 2011, 04:34:43 pm
Keep in mind if your mixing your blue pen ink and/or purple ink into your marker, and have used acetone, xylene or whatever in these, you dont need to add more.

Dont fill your marker past the thread, remember, it needs room to put the valve back in, for the fumes of the acetone etc to not pressurise inside the marker, and also just so you can shake the bastard up properly.

Any questions, feel free to ask.

Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 04, 2011, 04:50:30 pm
with my amazing skills i used an alcohol based orange scented disinfectant...
it was all fine some nice thick ink and then i found a stamp pad and decide to chuck it in to get the ink out of it ... only problam was it soaked all the ink up haha
so now i have a stainer stamp pad that smells like orange I AM FUCKING AWESOMME
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 04, 2011, 05:20:30 pm
Orrrigghhttyy
Supplies:
http://www.officeworks.com.au/retail/products/Office-Supplies/General-Stationery/Secretarial-and-Office-Consumables/Stamps-Pads-and-Refills/Ink-Refills-and-Pads/JA0315BK (http://www.officeworks.com.au/retail/products/Office-Supplies/General-Stationery/Secretarial-and-Office-Consumables/Stamps-Pads-and-Refills/Ink-Refills-and-Pads/JA0315BK) Some of this
Graphite powder (Bunnings)
Brake fluid (super cheap auto)

1. Empty your deskmate into a jar
2. Add 2 teaspoons of graphite powder
3. Add about 2-3 drops of brake fluid (can use fish oil)
4. Leave it for a few days shake it up occasionally
5. Empty into a marker

There you have it a drippy as fuck permanent ink blend!
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 09:26:11 am
Yo, what's the Graphite powder for? Just to thicken it or something?

I grabbed some blue black stamp pad ink and some blue quill ink once, chucked it in with the bic pen stuff....
Was ok ink, bit thin though...

You should give some leather dye a go man, add some of that to your inks....

Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 09:58:17 am
Here's a quick 5min splash together that goes REAL nice. You can last up to 4 - 5 layers of buff with one of these.  8)

Open your marker up, and 3 1/4 fill will Blue or Purple Grog Ink.
(Pink also looks dope, and I just use grog because I can, guess you can use any brand you like.)

Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 10:03:10 am
Now, I normally drip in like 3 drops of xylene, and 3 drops of Acetone.

If you've used the Blue Grog, add in a good heaped teaspoon of Methylene Blue Crystals.
If you've used the Purple or Pink, add in a good heaped teaspoon of Gentian Violet Crystals.

Do up your marker, shake it up, and wreck stuff!

Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 10:06:53 am
Carrying on from the Grog ink post above, Here's the "Bigger Brother" to this recipe...

You will need;

Your empty marker of choice. (I use 15mm Molotow Burners.)
Bottle of Violet Garvey. (this is american price marking ink. Awesome.)
Bottle of Illadell Bleed Through Concentrate.
Xylene/Acetone/1k or 2k Thinners.
Gentian Violet Crystals/Powder.
A Blue Dykem Mop. (Layout Fluid.)

Half Fill your marker with Violet Garvey. This is the Bomb shiz, should stain and heavely bleed through buff just on its own.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 10:14:25 am
Chuck in a well heaped teaspoon of Gentian Violet Crystals.

Dump in a good squirt of the Illadell "Bleed Through Concentrate".
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 10:24:07 am
Add in a few drops of Xylene/Acetone.

Top up rest with Dykem Steel Blue. (An Engineers Layout Stain. Supposedly stains metals.)

The Dykem Steel Blue is also a "Mop", so you can just bust straight out onto shiny metal things if you want and apparently stain the crud out of it.
Nice colour too.

And there you have a "Buff S****r".  :!:
This one can come through up to 12 layers of buff.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 10:48:10 am
Word up to PBP, Staunch Bombers, Keep Bombin' the Line!
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 02:36:05 pm
Now for the monster I created bout a month back, this one is fun, and makes a right mess out of everything!  :twisted:

You will need;

2 Empty glass jars.
Dymark engineers layout staining ink. (Blue or black, both are cool.)
Dykem mop.
Xylene.
Acetone. (or nail pollish remover.)
Raven Oil.
Leather dye. (Purple is best. Black/Red will do.)
Violet Garvey.
Methylene Blue.
Gentian Violet.
An ink to use as a "base".
(I use the "corio special" which also has a green staining additive mixed into it,
I also have a tin of  black "razor Ink" and a blue and a purple bottle of "illadell bleed through ink".)
RP7 (or WD40/Fish oil capsules.)
Illadell Bleed Through Concentrate.
A Maccas straw
A teaspoon.
Gloves.

Your empty marker of choice. Id make sure its a good quality one, as you dont want this leaking ANYWHERE!
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 02:41:53 pm
 :twisted:
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 05, 2011, 02:51:34 pm
Pour some of the Dymark into a jar, bout 1/4 full.
Add the Raven Oil.

You want about a 50/50 mix of Raven Oil/ Dymark.

Now, you will notice this turns to a thick sludge, completely useless in a marker.
Pour in some acetone to thin it back to a good "ink" consistency. LESS IS MORE.
You can always add a bit more, but you cant take any out if you put in too much.
Put the lid on and shake well.

Pour your assortment of "ink bases" into your other jar. Bout a 1/4 full. Just a splash of this, splash of that.
Put the lid on and shake well.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 05, 2011, 09:42:45 pm
where do you get all your supllies? dope ink recipes by the way
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 09:39:32 am
Cheers man,
I cant tell you how/where I get the violet/blue chemical powders... but I can hook you up with some if you want.
Everything else is basically just from Bunnings (the solvents, gloves, deck stain all that kinda shyte.)
Officeworks. (markers, pens, various stamp pad inks, quill inks etc.)
Otherwise its all been collected over a few years from

Giant Productions.
OzGraff.com
ArtPrimo.com
OinkArtLtd.com

You only have to be 18+ to buy spray paint.

 :twisted:




 
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 10:09:01 am
Ok, so now you will have a Jar containing your 50/50 Dymark Raven Oil Mix. (Thinned with acetone.)

And a Jar of your random ink "bases". (For mine I used I splash of Corio, splash of Blue Illidel, Splash of Garvey and some Bleed through Concentrate, and some of the Purple Fiebings (Leather Dye.) and some of the Dykem Blue.
(No real method to this, I just tipped some this, some of that, into the jar, untill Id used everything I have.... 8) )

Take your empty marker.

Add about 1/4 of the Dymark/Raven Oil mix.

Add about 1/4 of the Molotow Mix you've previously made. (if you have it, if you dont, dont worry.)

Top up rest of the marker (to just under where the thread starts, or less) with your "ink base" mix.

Add to this a heaped teaspoon of Gentian Violet, and if you want, another heaped teaspoon of Methylene Blue.

Watch your consistencies, as this has the potential to become extremely watery and "leaky".
Take into consideration how much of your "added inks" already contain plenty of xylene/alcohol/acetone whatever....)

Lift a few drops of Xylene using the maccas straw, and add those.

Add approx half a teaspoon of RP7 (or WD40, or fish oil....)


.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 10:23:08 am
Do up your marker as well and as carefully as you can.

Shake it. Hard. Make sure everything gets mixed up, the powders dissolve etc.

Pump the ink through the nib, and go destroy everything.

I would recomend using the ink in the nib up each time, before you put the lid back on... this one gets messy.

Each time you make an ink, try and jot down a rough "recipe".
Go  chuck up a tag somewhere that gets buffed, just so you can see how well it performed.
Once your happy you've created a monster, stick to that one.

 :twisted:  :L  :twisted:
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 01:53:22 pm
Pump valve "flow pen" style markers. (sorry, got over excited with arrows.... :roll: )

Also, here's a really nice secret that beats taping and untaping up your marker everytime to fill/refill it.

Just before you screw on the top, slap some ordinary paper glue, or rub a glue stick onto the thread.
This will seal it, so the ink cant leak out of there, and when you go to unscrew it again, it will just crack off as you turn it.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 06, 2011, 05:12:55 pm
yeah me nd a mate are goin to giant soon probs on the weekend what ink is worth  getting?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 05:30:17 pm
Molotow Coversall fo sho. Itll be like $25, but last ya ages.
Deffinately grab a molotow burner marker too. And you'll want
Atleast 1 replacement nib too.

The grog goes ok, and is a bit cheaper.

None stain or are "hard to buff" or whatever they say...


If your loaded with cash get the big tin of "Marsh Tgrade" hes got, and ill show
You a killer combo to put with that.

Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 06, 2011, 05:33:27 pm
Ill suss out the razor ink later and let ya know...
If I can smell it through the unopened tin, its gotta be good right!?
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 06, 2011, 05:56:17 pm
yeah pity im not 18 or i'd pickup some laks and shit :/
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 06, 2011, 06:22:50 pm
oi are you serious about being able to hook us up with some of them powders bro? like how much for what price etc
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 07, 2011, 02:00:16 pm
Ironlak sucks.

Use MTN, 94 or Sabotaz80. Actually, just get yourself one of these "sekt" cap adaptors, and rock out with $2 exports.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 07, 2011, 04:03:45 pm
yeah 2 dolla exports haha i know a shop where the girl sells em to under 18 but she makes em 5 bucks fuck that unless im real desperate
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 11, 2011, 09:43:27 am
Heya dude, did you end up goin into Giant?
If so, what did ya get?
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 12, 2011, 05:45:53 pm
i got a molotow burner and went halvies with a mate and got some grog ... they had molotow transformers on sale for 7 bucks for the small ones so my mate picked up one of them. its pretty dope
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 12, 2011, 11:01:41 pm
The 20mm marker? What colour grog? I got one of those transformers
Once, didnt like the way the lid clips on... It was 50mm tho or somethin...

Anyways, lemme know what colour grog n ill hook yas up with some "additives".  :twisted:
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 13, 2011, 05:20:37 pm
black but its already put in our markers but im goin next week again with shitloads more money...
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 13, 2011, 10:44:41 pm
do you reckon you could hook us up soon-ish i'll have black anyway how much money for like what amount?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 14, 2011, 09:44:44 am
Ill chop yas a baggy of shit, should be enough for you n ya mates marker, maybe more...
Otherwise its like $25 a bottle or somethin... so dun worry, just wait till I buy more.

If your not gettn paint, go www.ozgraff.com
Like $5 shippin, good prices too.

Ill dump ya bag in upwey somewhere for ya tomoza (friday) night. Cool?
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 14, 2011, 12:59:15 pm
what time of night ? like late afternoon or after its dark? coz i gotta go out for tea tomorrow lol
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 15, 2011, 12:22:53 am
Pm me. Be like 6ish if thats cool. Otherwise ill stash it for ya. Ill give ya some
Methylene blue for the black. Bleeds through good. Ill give ya 2
Markers or so worth.
Pm me.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 15, 2011, 06:33:10 pm
Well, waited around and you didnt show...  :roll: Check ya pms man...
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 16, 2011, 06:02:06 pm
thanks i got it :D cheers bro :D
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 17, 2011, 11:49:16 am
No wukkuz man.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 17, 2011, 03:10:28 pm
jacks got my marker but and im coppin a fine :( going back to get another one soon though :)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 18, 2011, 12:21:32 pm
Sucks huh, bloody scum. Gotta run faster next time.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 19, 2011, 12:56:47 pm
i didnt run :O i had a bag ful of paint and they didnt even search it hahah
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 19, 2011, 04:12:52 pm
Geez, sounds like you did ok then considering...
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 19, 2011, 11:21:51 pm
im too young to get any serious punishment
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 22, 2011, 05:15:33 pm
Just everywhere... But ozgraff.com are good, and artprimo.com
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 22, 2011, 08:17:49 pm
Just everywhere... But ozgraff.com are good, and artprimo.com
alright thanks mate
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 24, 2011, 04:19:41 pm
No worries man.
I got the fiebings and garvey from artprimo.
The raven oil/dymark/razor and grog from ozgraff.
The acetone/xylene from bunnings,
And the rest of the bits n peices from Giant, officeworks etc.
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 24, 2011, 06:49:17 pm
No worries man.
I got the fiebings and garvey from artprimo.
The raven oil/dymark/razor and grog from ozgraff.
The acetone/xylene from bunnings,
And the rest of the bits n peices from Giant, officeworks etc.
yeah thanks, this is it also stocks some of that stuff i noticed so probs just get it there.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 28, 2011, 10:53:07 am
Gotta say I probably wouldnt bother with raven oil, just thickens up something shocking... ruined many a batch of inks with that.

Last night I made (fluked) a wicked sick ink! ------->

Half filled my empty marker with Purple Grog.
Added about 2 teaspoons worth of the "Illadell Bleed Thru Concentrate".
x1 Heaped Teaspoon of Methylene Blue.
x1 Heaped Teaspoon of Gentian Violet.
Then topped rest of marker up with Violet Garvey.
Dark, Thick and Dope.

Havnt tested it yet.... should bleed through a few layers, hopefully even stain.
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 29, 2011, 08:20:35 am
Gotta say I probably wouldnt bother with raven oil, just thickens up something shocking... ruined many a batch of inks with that.

Last night I made (fluked) a wicked sick ink! ------->

Half filled my empty marker with Purple Grog.
Added about 2 teaspoons worth of the "Illadell Bleed Thru Concentrate".
x1 Heaped Teaspoon of Methylene Blue.
x1 Heaped Teaspoon of Gentian Violet.
Then topped rest of marker up with Violet Garvey.
Dark, Thick and Dope. sounds fresh, im just looking for a reciept that can leave nice bold ghostys, thinking about mixing garvey with molotow cocktail ink any thoughts?

Havnt tested it yet.... should bleed through a few layers, hopefully even stain.
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 29, 2011, 08:23:16 am
yeah sounds fresh, im thinking bout mixing garvey with molotow cocktail ink and then adding some dot 3 break fluid so it sinks into the surface to leave good ghostys any thoughts?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 29, 2011, 01:46:47 pm
The molotow inks are sweet, they have bitumen in them, ive had a few good batches using that as a base...

Id even just try rockin the Garvey on is own, with a bit of dot 3, maybe some xylene or acetone, but just a bit. also adding some kind of oil, like wd40 or fish oil capsules slows the drying time, so it can really eat into shit.
Honestly, I dont know man, give it a go, let us know how it goes.  :?:

They say 50/50 Garvey and Marsh T-Grade is THE BOMB shit. But i cant afford the marsh........... like $60 a tin or something.  :o
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 29, 2011, 04:18:03 pm
yeah i'll get some garvey and put some fish oil in it, i'll let u know how it go's... :)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 30, 2011, 09:42:45 pm
ive gotta give dot3 a go.
Im also looking into acids/etches... Have you used those?

Title: Re: Make Your Own Ink, How to...
Post by: all city on April 30, 2011, 10:17:07 pm
ive gotta give dot3 a go.
Im also looking into acids/etches... Have you used those?


dot 3's good man just a tiny drop, nah cant say i have man worth a go though.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 30, 2011, 10:22:01 pm
yyoou gotta be careful with dot 3, less is more in this case
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 30, 2011, 10:36:52 pm
Thats what I figured...
I wanna try "texture paint", the grippy stuff they spray on steps. Then buffed or not, its there.  :twisted:
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 30, 2011, 10:40:06 pm
your a fuckin genious
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 30, 2011, 10:40:55 pm
your a fuckin genious
hes the belgrave wizard hahahahaha
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 30, 2011, 10:43:26 pm
do you guys know eachother? hahahah yeah baba desi ftw
Title: Re: Make Your Own Ink, How to...
Post by: all city on April 30, 2011, 10:53:25 pm
do you guys know eachother? hahahah yeah baba desi ftw
nah i dont know him, yeah cunt pops out of no where i always see him creepin along the lines...
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 30, 2011, 11:04:51 pm
haha yeah mang one time i was real bored so me and baba desi went and did panels together...
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on April 30, 2011, 11:09:36 pm
Bombn baba! Hahaha, they should make a "bobble head doll" of that for cars.


Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on April 30, 2011, 11:11:39 pm
ahahahahahha funniest cunt
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 05, 2011, 12:11:09 pm
*Bump.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on May 05, 2011, 12:12:07 pm
bump
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 16, 2011, 04:57:23 am
Bbummpp...
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on May 21, 2011, 05:00:16 pm
yo bro, know any dope paint recipes? like for mops? junobo style shit
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 21, 2011, 06:54:55 pm
Nah, paint dosnt bleed through or stain, so I dont bother.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on May 21, 2011, 07:27:57 pm
the only good thing bout paint is the colors like chrome n shiz
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 21, 2011, 11:31:56 pm
Yeah, so just get cool colours, and bomb. But theres no need to fiddle with em...

Things like solid markers will lightly stain metal tho... And they work on wet stuff too.
Id only suggest getting good brand paint, or the most for ya money...

You dont need id to buy markers ink/paint, only cans.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on May 22, 2011, 04:52:28 pm
solids are shit
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 22, 2011, 07:41:41 pm
I agree, but they have there uses... Even if it does look like your bombn with crayons... Haha
Title: Re: Make Your Own Ink, How to...
Post by: all city on May 22, 2011, 09:40:17 pm
solids are pretty nice but run down real quick, and a bit of a headache to the buffers  :evil:
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on May 22, 2011, 11:05:09 pm
good watch is 'we ride by train vol1' on ebay freight vid
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on May 23, 2011, 12:01:15 pm
Stompdown channel on youtube. Full of mad live bombing and peicing by SDK... always a fav.
Title: Re: Make Your Own Ink, How to...
Post by: all city on June 26, 2011, 08:07:50 pm
id love to ask break msa what ink he uses to stain trains he's got so many ghostys on hitachi trains..  :evil:
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on June 27, 2011, 01:00:18 am
The older trains were easier... A bit of stamp pad ink n some acetone n ravenoil was more than enough...
Now they use a "graffiti proof" coating, which is kinda like glass... Glue some sandpaper on the other end of ya marker, and rough up the surface first. Then you'll prob get a dope stain...

Follow my recipe tutes, and after a bit of trial n error... You'll have yaself a mean ass brew.
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on June 27, 2011, 01:02:51 am
Should organise a time oneday to get together n cook up some ink somewhere... Who knows, we might get the ultimate met killer!?  :L
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on June 27, 2011, 09:31:42 am
haha  :evil:
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on June 27, 2011, 01:48:12 pm
shit to be you
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on June 28, 2011, 12:14:24 am
Pliers. But be carefull.... My garage floor n bench is covered in stains.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on June 28, 2011, 11:08:32 am
i once got a marker ran over by a car... theres still stains on the road
Title: Re: Make Your Own Ink, How to...
Post by: all city on June 28, 2011, 01:08:07 pm
yeah the pliers worked a treat, and no mess on my garage floor  8)
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on June 28, 2011, 03:21:58 pm
You can get pourer tops for your grog ink bottles from ozgraff.com, $4 though or something....but you just keep puttin it on your new inks....nice and easy pour..... just a suggestion.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on August 01, 2011, 04:48:57 pm
Put the lid on, not super tight, but not so it leaks, and leave to sit overnight, a day or two.... whatever.
And just give it a shake now and then whenever you think about it, just to help the thinners suck out the ink from the tubes.
(I would also carefully every now and then open the jar, just to let the gasses out.)
i think i fucked it up, i put like 60 pens in and a tiny drop of thinners :/
Title: Re: Make Your Own Ink, How to...
Post by: all city on August 01, 2011, 04:58:09 pm
how many pens should i add in if i want to make a mixture to fill up my empty bottle of grog with? not to sure.
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on August 01, 2011, 07:36:51 pm
Like 150
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on August 02, 2011, 12:09:19 pm
I only relly use this "pen" thingy as an "add" for my inks....
I also pour in enough thinners/alcohol whatever so it comes up just under halfway the level of the pen bits....
Make sense?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on August 02, 2011, 12:10:30 pm
For $12 a bottle of grog, may as well just buy another one........
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on August 02, 2011, 05:53:16 pm
is the 3/4 marsh 1/4 garvey mix good?
Title: Re: Make Your Own Ink, How to...
Post by: Patrick Slayzee on August 03, 2011, 08:50:30 am
Never forked out the cash for Marsh.... maybe one day.
I hear good things though....
Title: Re: Make Your Own Ink, How to...
Post by: randomkiddo on August 03, 2011, 05:51:23 pm
yeeh no shit